With the same dimensions than the IGEM 2-35.5, the IGEM 215-1 35.5 is compliant with the DAS NF S61 937 and prEN 13 637 norms, and works at 24/48 V DC.
SECURITY, QUALITY and DESIGN
Tamper proof device:
Equipped with pads for a discreet fixing by retro-pressure setting in the profile avoiding vandalism.
Locking sensor status by built-in reed contact
ELECTROMAGNETIC LOCKING FOR ESCAPE DOORS
Compliant with the NS S61 937 and prEN 13637 norms
Hi-quality corrosion proof treatment
Each series passed salt spray exposure tests following ASTM B117 and ISO 9227 norms.
The steel quality:
To avoid any residual magnetism.
|¹ Main Features|
|Security/Holding Force:||Grade 3+ (≲ 3 000N ) Tol. 15%|
|Category of use:||Grade 3 (High frequency - Public use)|
|Durability/reliability:||Grade 9 ( > 1 000 000 cycles)|
|Corrosion resistance/humidity/IP protection:||Grade 3 (EN 1670, EN ISO 9227)|
|Residual magnetism:||0% - By design (No push-pin, no electronic quick-off)|
|Locking monitoring (LSS):||Reed|
|Electrical/spark protection:||Built-in metal-oxyde varistor (MOV)|
|Power:||24/48VDC - 250/125 mA|
|² Environmental protection / IP Rating:||IP 43 (Mortise)|
|Sizes (L x h x w):||195 x 35.5 x 26 mm|
|Weight:||~ 2 kg|
|Environmental / Temperature||-40°C to +60°C|
|Compliances:||NF S61 937, CE 2014/30/EU, EN 13637 (Chap.7) 2015, EN 1670, EN ISO 9227, ASTM B 117, RoHS/Reach|
|* All product specifications are subject to change without notice.|
¹ See chapter 7 Norm EN 13637
² Electrical connections shall be protected according to the installation environment.