SC24000 is a 2 door controller programmable through readers. It can be used to control either 1 or 2 doors, and can enrol a sequential block of up to 100 cards. It is available in DIN rail enclosure (SC24000) or just with only the electronics (SC24000-E).
Features Specifications Support Related products
Secure standalone access control solution
The SC24000 can manage a complete 2 door standalone access control system without any software. The SC24000 can be used with any Wiegand 26/34 proximity reader.
Wiegand 26/34 automatic selection
The SC24000 will detect automatically if the reader is Wiegand 26 or 34 bits.
Easy mounting
DIN rail enclosure
Mounting: | Surface |
---|---|
Housing: | DIN rail enclosure |
Technology: | Controller |
Users: | 4000 cards/codes |
Door contact: | 2 door sensor inputs |
Door access: | Single door mode / 2 readers (one reader on each side of the door)
2 door mode / 2 readers (one reader on each door) |
Protocol: | Auto detect Wiegand26 / Wiegand34 |
System applications: | Anti-passback |
Programming: | Programmable through readers
Programming with Master cards Shadow delete card per user or per group of users |
Enrolment: | Enroll sequential block of cards - max. block 100 cards |
Configuration: | Normal Wiegand mode (only card) and XPR keypad+reader model mode (card and PIN code) on any reader |
Relay output: | Relay output 1 (door forced alarm)
Relay output 2 (door open too long alarm) |
Relay time: | Pulse (1-250 s) or Latch mode |
Push Button Input: | 2 |
Voltage: | 8-15 V DC |
Consumption: | Max. 180 mA (without readers) |
Mechanical Characteristics | |
IP rating: | IP31 |
Dimensions (L x H x W): | PCB: 102 x 86 mm |
Weight: | ~0.12 kg |
Operating temperature: | 0ºC to 50ºC |
Operating humidity: | 0 to 95% (non-condensing) |
* All product specifications are subject to change without notice. |