The Vortex is the real first improvement since the creation of the electromagnet. Being a pioneer as a manufacturer, we have managed to reduce considerably the magnet sizes and their power consumptions. With a surface mount model reduced by 3 cm in size when door is opened and a 20% power consumption decrease, the holding force reaches more than 15000N!
A universal hybrid locking of a very small size fitted with a conical orifice which confines a very strong alloy pin within a vortex of magnetic and mechanical force.
The top of the range:
The highest holding force available.
Hi-quality corrosion proof treatment protection: Each series passed salt spray exposure tests following ASTM B117 and ISO 9227 norms.
The steel quality:
To avoid any residual magnetism.
Early warning technology
The Vortex is fitted with pressure sensors: EW technology allows the unit to send an alarm before the access would be forced without authorisation. This locking model warns before access was forced. This is a unique advantage on the security market.
Hi-end hybrid locking system with large shaped powerful LED for a long range visibility monitoring. This function allows to check the status of the door up to a large distance.
No residual magnetism
The use of a high quality metal guarantees intrinsically the absence of any residual magnetism. No system of uncertain reliability is added to the product: Neither a push button on the armature plate, nor a kick-off electronics device.
|¹ Main Features|
|Security/Holding Force:||Grade 6++ (15 000N)|
|Category of use:||Grade 3 (High frequency - Public use)|
|Durability/reliability:||Grade 9 ( > 1 000 000 cycles)|
|Corrosion resistance/humidity/IP protection:||Grade 3 (EN 1670, EN ISO 9227)|
|Residual magnetism:||0% - By design (No push-pin, no electronic quick-off)|
|Locking monitoring (LSS):||Built-in reed contact|
|Door position monitoring (DSS):||Built-in reed contact|
|Early break-open warning alarm (EW):||Built-in pull dynamic sensor + micro-relay + built-in buzzer|
|Electrical/spark protection:||Built-in metal-oxyde varistor (MOV)|
|Power:||12/24VDC - 330/170 mA|
|² Environmental protection / IP Rating:||IP 43 (fixed under transom)|
|Sizes (L x h x w):||218 x 36 x 30 mm|
|Environmental / Temperature||-20°C to +60°C|
|Compliances:||NF S61 937, CE 2014/30/EU, EN 13637 (Chap.7) 2015, EN 1670, EN ISO 9227, ASTM B 117, RoHS/Reach|
|* All product specifications are subject to change without notice.|
¹ See chapter 7 Norm EN 13637
² Electrical connections shall be protected according to the installation environment.