The new XPR 2.0 generation of access control readers has been developed to offer more possibilities with fewer references. The MTPX-XPR-2.0 is an RFID reader (EM, HID Prox and Mifare) with Wiegand and OSDP communication protocol.
More possibilities with less references. One reader can combine different communication protocols (Wiegand, RS-485, OSDP) and different technologies (EM, Mifare, Keypad, and soon NFC, Bluetooth, Biometry, etc...).
This range can be upgradable to the customer's needs. A reader can be upgraded from Wiegand to OSDP protocol and from CSN to an encrypted RFID.
Large LED around the sensor for an easy reading of the status
The tri-colour rectangular LED indicates the reader status. The reader changes the LED colour when presenting the card/keyfob: from orange to red if the access is denied or from orange to green if the access is authorized. The orange LED indicates that the reader is connected (idle mode).
XPR Toolbox software
Credentials, protocol programming and firmware updates can be configured with the help of our XPR Toolbox software and the micro-USB port fitted at the back of the reader. This option provides progressive full flexibility future-proof features.
The new 2.0 range readers are available in two different colours: black and silver. Depending on the colour and technology, the possible references are the following:
- MTPXBK-MHWO (Black)
- MTPXS-MHWO (Silver)
|Colours:||Black or Silver|
|Reading range:||up to 6cm|
|Credentials:||EM4100, HID Prox, Mifare.|
|Outputs:||Wiegand / RS-485 / OSDP|
|1 internal buzzer (ON/OFF):||managed by the host|
|Tamper protection:||When opened or dismantled|
|Voltage:||9 - 14 V DC|
|Current consumption:||up to 150 mA|
|Suitable for outdoor use:||Yes|
|Dimensions (L x H x W):||51 x 92 x 27 mm|
|Operating temperature:||-20ºC to +50ºC|
|Operating humidity:||5% to 95% RH without condensation|
|* All product specifications are subject to change without notice.|
* 125 Khz EM/HID: EM/HID prox as standard. OEM 125 khz protocol available on request.
13.56 Mhz MIFARE: MIFARE compatibility: Classic, Ultralight, Desfire v1 and v2.
Bluetooth: OEM solution or XPR solution wich will be developped in phase 2.
Wiegand: standard 26 bits by default and programmable.
OSDP: OSDP v2.