B100PROX-MF is a dual Wiegand biometric reader combined with a MIFARE 13.56 MHz proximity reader for access control applications with storage up to 100 finger templates. Possibility to memorise finger template on MIFARE card for unlimited number of users. Programmable Wiegand Output output (8 to 128 bits).
Double Technology: Biometry Swipe and Mifare Proximity
The B100PROX-MF offers double technology with the following authentication: Finger only, Finger and card, Finger or card and finger on card.
The reader reads Mifare Classic, Ultralight and Desfire cards with a read range of 6 cm.
The SteelCoat protective coating provides added protection of fingerprint sensor for rugged environments
The matching time is < 2 s.
The storage capacity of the B100PROX-MF is 100 fingerprints and cards.
Finger on Card
In “Finger on Card” mode, there is NO LIMIT on the capacity of the fingerprints, since the fingerprints are stored in the user’s card, not in the biometric reader. Also the cards content only the 50% of the information required to granted the access. So in case of loss, the access security will not be put at risk. It will only be valid by presenting the corresponding footprint.
It's a perfect solution for installation with a large number of users as the information is not storage in the reader memory but in the card.
The finger on card mode is perfect for facilities in which personal information such as fingerprints are not allowed to be stored.
Reader configuration through Software
The reader configurations and finerprint enrolments are done via PC software. Connection between the biometric readers is RS485 used for fingerprint transfer and configuration. Reader management is integrated in our PROS CS access control software for configuration. Compatible with our EWS controller or any third party controller using our BIOMANAGER software. An RS485/TCPIP converter is available for third party integration.
Large LED around the reader for an easy and stylish reading status
Another key defining feature of the MINI range is the multi-colour rectangular status LED. The proximity and biometric reader’s change colour depending the user’s key fob/fingerprint is active (yellow), accepted (green) or denied (red).
Available in different colors
There are two colours available by default: silver and charcoal.
There are more colours available upon request, like white, green, blue, red, gold… to ensure these units will complement any decor or building design.
|Colours:||Silver, charcoal, white|
|Resin potted electronic:||Yes|
|Technology:||Biometry + Proximity|
|Matching time:||< 2 s|
|Reading type:||MIFARE Classic, Ultralight and Desfire|
|Read range:||1.5 - 5.5 cm|
|Enrolment:||through PC software|
|Configuration:||Configuration and user management is done with software
Wiegand protocol adjustment done through PC
Fingerprints stored in the reader and backup copy kept in the software
|Visible signal:||Tricolor status LED
|Audible signal:||Programmable buzzer (ON/OFF)|
|Wiring:||1 m cable|
|Consumption:||Max. 150 mA|
|Suitable for outdoor use:||Yes|
|Dimensions (L x H x W):||100 x 94 x 30 mm|
|Operating temperature:||-20ºC to +50ºC|
|Operating humidity:||5% to 93% RH non-condensing|
|* All product specifications are subject to change without notice.|