This double technology reader, in black ABS, offers a double access security, including a keypad and a compact 13.56 MHz reader. It can be installed either outside or inside. It comes with a RS485 bus and a backlight keypad. Its LEDs, tamper and buzzer are managed directly by the WS4. It can read Mifare Classic, Desfire and Ultralight.
Features Specifications Support Related products
RS-485 output
It works with a RS-485 output, establishing a bidirectional communication between the reader and the WS4 controllers, reducing the number of wires needed in the installation.
MIFARE RFID Reader
The MTPX-MF reads Mifare Classic, Ultralight and Desfire cards.
Tamper switch
Managed by the host - It sends a signal to the alarm when the keypad is opened and/or dismantled by force.
Blue backlit keypad
The MTPADP-RS-MF comes with an elegant blue backlight that can be easily disabled if necessary with My WS4.
The LEDs on the first digits on the keypads are used to indicate the status of the keypad:
Green: access granted
Red: access denied
| Mounting: | Surface |
|---|---|
| Housing: | ABS |
| Colours: | Black |
| Resin potted electronic: | Yes |
| Technology: | Keypad and Mifare RFID (13.56 MHz) |
| Keys: | Backlit metallic |
| Reading type: | Mifare Classic, Desfire and Ultralight cards |
| Read range: | up to 5 cm |
| Output: | RS-485 |
| Visible signals: | Red and green LEDs managed by the host |
| Audible signal: | 1 internal buzzer - managed by the host |
| Push buttons: | 1 |
| Tamper protection: | Yes - managed by the host |
| Wiring: | 50 cm cable |
| Voltage: | 9-14 V DC |
| Consumption: | 30 mA stand-by
100 mA maximum |
| MECHANICAL CHARACTERISTICS | |
| IP rating: | IP65 |
| Dimensions (L x H x W): | 51 x 92 x 27 mm |
| Weight: | ~0.17 kg |
| Operating Temperature: | -20ºC to 50ºC |
| Operating Humidity: | 5% to 95% RH without condensation |
| VERSIONS | |
| MTPADPBK-RS-EH: | ABS - Black |
| * All product specifications are subject to change without notice. | |
Subscribe to our newsletter
