DINMTPX-MF is a Mifare RFID reader that combines technology with style.
It will look great on your wall, as its design matches perfectly with practically any decor. Its performance will satisfy your demands too. Easy to mount and to use, it comes with a practical rectangular LED that indicates the status of the reader.
The DINMTPX-MF reads Mifare Classic 1K & 4K, Ultralight and Desfire cards.
The DINMTPX-MF is a multi-protocol reader that needs to be connected to a Host. Wiegand 26, 34, 42, 58, 24, 32, 40, 56 bit
Large LED around the reader for an easy and stylish reading status
DINMTPX-MF has a multicolor rectangular status LED.
The RFID reader changes colour if the user’s key fob is active (yellow), accepted (green) or denied (red).
MIFARE RFID Reader
The DINMTPX-MF reads Mifare Classic, Ultralight and Desfire cards with a read range of 6 cm.
It cannot be easier to complete any flush mount. Each piece matches perfectly with the next, and they can be installed in any standard electrical gang box. (The mask and the electronics are sold separately.) The mask is available in UK and European standards.
Plug & Play System
Double and single technology available in different versions, standalone or network, combining biometry, keypad and RFID.
Available in different colours
The DIN Range is available on 3 colours by default: silver, charcoal and white. Three colours that usually go very well with any decor or building design.
And for those who want something different, there are more colours available upon request, like green, blue, red, gold… You will have definitely many options to choose.
|Mask:||ABS (sold separately)|
|Colours:||Silver, charcoal, white|
|Protocol:||Wiegand 26, 34, 37, 42, 24, 32, 35, 40, 56 bits|
|Reading type:||Mifare Classic, Ultralight and Desfire|
|Read range:||Up to 6 cm|
|Operating frequency:||13.56 MHz|
|Visible signal:||Green LED: Access granted - Externally Controlled
Red LED: Access denied - Externally Controlled
Orange LED: Idle mode
|Audible signal:||Programmable buzzer (ON/OFF)|
|Tamper protection:||When opened or dismantled|
|Voltage:||9-14 V DC|
|Consumption:||Max. 150 mA|
|Dimensions (L x H x W):||80 x 80 x 9 mm|
|Operating temperature:||-20ºC to +50ºC non condensing|
|Operating humidity:||5% to 95% RH without condensation|
|DINMTPX-MF-E:||DIN range - electronic only - MIFARE RFID reader - Multi-Wiegand|
|DINFP:||ABS single frame for all DIN readers & devices - EU standard|
|DINFP-UK:||ABS single frame for all DIN readers & devices - UK standard|
|DINFP2H:||ABS double frame for all DIN readers & devices - Horizontal|
|DINFP2V:||ABS double frame for all DIN readers & devices - Vertical|
|* All product specifications are subject to change without notice.|