XPR is proud to launch a unique user friendly offline RFID reader on the market. The Smart surface mount MTPX-MF-SA can be used with mainly our Access software but also our Hotel Solutions software. The readers can be programmed with built-in micro-USB function or desktop card enrolment. Events can be dowloaded onto master MIFARE cards which also could be used to activate and program additional readers on site.
The Black Edition is a whole new family of products with single and double technology, all of them finished in black ABS. You can have now all your RFID and biometry readers, as well as your keypads, in the same style. You can choose if you prefer to install only one type of reader/keypad or combine two technologies in one.
Large LED around the sensor for an easy reading of the status
MTPX-MF-SA has a multi-colour rectangular status LED. The RFID reader changes colour if the user’s key fob is active (yellow), accepted (green) or denied (red).
Available in different colours
There are two colours available by default: silver and black.
There are more colours available upon request, like white, charcoal, green, blue, red… to ensure these units will complement any décor or building design.
Mifare RFID reader
The MTPX-MF-SA is a Mifare read/write reader. It can support Mifare Classic 1K and 4K memory. The credit on card option is also available with this reader with software configuration.
The MTPX-MF-SA can be configured via USB connection or via card configuration. There is a Micro USB connector on the back of the reader for an easy programming through PC. With the cards, you only need to program them from the software and afterwards you can easily make the reader initialisation, configuration and event collecting.
|Colours:||Silver and black|
|Events memory:||3500 events|
|Reading type:||Supported cards: Mifare classic 1K, 4K|
|Read range:||Up to 6 cm|
|Programming:||Micro USB or Cards|
|Output:||1 built-in relay (2A; 24V AC/DC) RS-485 for remote relay unit RU2, DINRTT, RTT|
|Relay time:||Trigger 1-255 s or toggle|
|Visible signal:||Green LED: Access granted
Red LED: Access denied
Orange LED: Idle mode
|Audible signal:||Internal buzzer|
|Exit button input:||Yes|
|Software support:||PROH-MS, PROA-MS|
|Blacklist capacity:||500 cards|
|Dimensions (L x H x W):||51 x 92 x 25 mm|
|Operating Temperature:||-20ºC to 50ºC non condensing|
|Operating Humidity:||5% to 95% RH without condensation|
|MTPXS-MF-SA:||ABS - Silver|
|MTPXBK-MF-SA:||ABS - Black|
|* All product specifications are subject to change without notice.|