My WS4 EN | FR | ES | DE | IT



Standalone Biometric Reader with Mifare Card Reader

B100PROX-MF-SA is a simple one-door standalone biometric and RFID system (or 2 doors when used with DINRTT). The reader programming is quick and easy. It can store up to 98 fingerprints and 2000 RFID cards. It has one integrated relay output and one exit button input.
If secure installation is needed, the reader can be connected to a remote relay unit in a secured area, which also plays the role of an exit push button.
Complete setup and programming can be done by swiping. It can read Mifare Classic, Ultralight and Desfire.

Features Specifications Support Related products

XPR / Solutions / Standalone Access / Biometric readers /



Black Edition

In addition to the standard silver colour in aluminium finish, the MINI range is also supplied as standard in the Black Edition. It is a whole new standard product family in ruggedized and light black ABS finish with single and double technology.

Double Technology: Biometry Swipe and Mifare RFID

The B100PROX-MF offers double technology with the following authentication: Finger or card.
The reader reads Mifare Classic, Ultralight and Desfire cards with a read range of 6 cm.
The SteelCoat protective coating provides added protection of the fingerprint sensor for rugged environments.
The matching time is < 2 s.
The storage capacity of the B100PROX-MF is 100 fingerprints and 2000 cards.

Available in different colours

There are 2 different colours by default for the B100PROX-MF-SA: silver and black; with more colours available upon request like charcoal, white, green, blue or red.

A whole range of options to meet your needs and décor style.

Tamper switch

Sends a signal to the alarm when the biometric reader is opened and/or dismantled by force.

Large LED around the sensor for an easy reading of the status

Another key defining feature of the MINI range is the multi-colour rectangular status LED. The RFID and biometric readers change colour depending on the user’s key fob/fingerprint. Three LED statuses are available:
- idle (orange) - no key fob/fingerprint present
- accepted (green) - key fob/fingerprint present
- denied (red) - not valid key fob/fingerprint present


Mounting: Surface
Housing: ABS
Colours: Silver and black
Resin potted electronic: Yes
Technology: Biometry + RFID
Templates: 98 fingerprints and 2000 RFID cards
Sensor: Swipe capacitive
Reading type: Mifare Classic, Ultralight, Desfire
Read range: 1.5 - 5.5 cm
Programming: By Master finger
Relay output: 1 Relay N0/NC contact (2A /24V AC/DC)
Relay time: Pulse (1-30 s) or toggle (ON/OFF)
Visible signal: Tricolor status LED
Backlighting ON/OFF
Audible signal: Programmable buzzer (ON/OFF)
Push Button Input: Yes
Wiring: 50 cm cable
Voltage: 12 VDC
Consumption: 150 mA
Mechanical Characteristics
Dimensions (L x H x W): 100 x 94 x 30 mm
Weight: ~400 g
Operating temperature: 0ºC to 50ºC
Operating humidity: 5% to 93% RH non-condensing
IP rating: IP54 (internal use only)
B100PROXS-MF-SA: ABS, silver
B100PROXBK-MF-SA: ABS, black
* All product specifications are subject to change without notice.


  • Download B100PROX-MF-SA V2 & B100PROX-EH-SA V2 Manual - EN
  • Download B100PROX-MF-SA Data Sheet - EN
  • Download B100PROX-MF-SA Firmware
  • GO Manuals in other languages