DINMTPX-EH is an EH RFID reader that combines technology with style.
It will look great on your wall, as its design matches perfectly with practically any decor. Its performance will satisfy your demands too. Easy to mount and to use, it comes with a practical rectangular LED that indicates the reader status.
The DINMTPX-EH offers the possibility to select between two reading types: EM (Electro Marin) or HID 125 kHz.
The DINMTPX-EH is a multi-protocol reader that needs to be connected to a Host. Wiegand 26, 34, 37, 42, 24, 32, 35, 40 bits
Large LED around the reader for an easy and stylish reading of the status
DINMTPX has a multi-colour rectangular status LED.
The RFID reader changes colour if the user’s key fob is active (yellow), accepted (green) or denied (red).
EH RFID Reader
The DINMTPX-EH reads EM4002/4100 and HID 125 kHz compatible cards with a read range of 7 cm.
It cannot be easier to complete any flush mount. Each piece matches perfectly with the next, and they can be installed in any standard electrical gang box. (The mask and the electronics are sold separately.) The mask is available in UK and European standards.
Available in different colours
The DIN Range is available on 3 colours by default: silver, charcoal and white. Three colours that usually go very well with any décor or building design.
And for those who want something different, there are more colours available upon request, like white, green, blue, red, gold… You will have definitely many options to choose.
Plug & Play System
Double and single technology available in different versions, standalone or network, combining biometry, keypad and RFID.
|Housing:||ABS (sold separately)|
|Colours:||Silver, charcoal, white|
|Protocol:||Wiegand 26, 34, 37, 42, 24, 32, 35, 40 bits|
|Reading type:||EM4002/4100 compatible & HID (125 kHz) compatible|
|Read range:||Up to 7 cm|
|Operating frequency:||125 kHz|
|Visible signal:||Green LED: Access granted - Externally Controlled
Red LED: Access denied - Externally Controlled
Orange LED: Idle mode
|Audible signal:||Programmable buzzer (ON/OFF)|
|Tamper protection:||When opened or dismantled|
|Voltage:||9-14 V DC|
|Consumption:||Max. 45 mA|
|Dimensions (L x H x W):||80 x 80 x 9 mm|
|Operating temperature:||-20ºC to +50ºC non condensing|
|Operating humidity:||5% to 95% RH without condensation|
|DINMTPX-EH-E:||DIN range - electronic only - EM & HID 125 kHz RFID reader - Multi-Wiegand|
|DINFP:||ABS single frame for all DIN readers & devices - EU standard|
|DINFP-UK:||ABS single frame for all DIN readers & devices - UK standard|
|DINFP2H:||ABS double frame for all DIN readers & devices - Horizontal|
|DINFP2V:||ABS double frame for all DIN readers & devices - Vertical|
|* All product specifications are subject to change without notice.|