My WS4 EN | FR | ES | DE | IT

RX4W

RX4W

Radio Receiver

This radio receiver has a multi-protocol interface and 4 Wiegand outputs to work with our EWS controller.

 

Used with any of the TX 868 MHz transmitters, it provides the perfect radio solution to active remotely the access control of your parking gate, sliding doors, store rooms, etc, as you are approaching the facilities.

Features Specifications Support Related products

XPR / Access / ONLine Access / Radio /

RX4W

Features

APS- Approaching System

Thanks to the Approaching System (APS), the RX4W gets faster the signal from the radio transmitter:
1. The user activates the radio transmitter before reaching the radio coverage area.
2. Within 15 seconds, the user enters the coverage area. The door is still closed, but the user does not need to press again any button.
3. The radio receiver gets the signal and opens the door.

Easy and quick installation

No need of long wire connections to install a radio system with the RX4W radio receiver and the TX transmitters. Everything can be programmed very easily with the EWS and Web Access software.

Specifications

Mounting: Surface
Housing: ABS
Colours: White
Technology: Radio
Frequency: 868 MHz
Antenna: Built in
Interface: Wiegand 26 & 42 bits
Rolling code: Yes, managed by controller
Reading type: Radio
Wiring: Terminals
Voltage: 12 VDC
Consumption: Max. 40 mA
Compatible with: EWS and webserver controllers
Mechanical Characteristics
IP rating: IP54 (IP65 with gland)
Dimensions (L x H x W): 82 x 190 x 40 mm
Operating Humidity: 5% to 95% RH without condensation
* All product specifications are subject to change without notice.

Support