This double technology reader, in ABS, offers a double access security: via code and via card. It can be installed either outside or inside. It comes with a RS-485 bus and a backlight keypad. Its LEDs, tamper and buzzer are managed directly by the WS4 controllers. It can read EM or HID 125 kHz cards, depending on the programming selected.
It works with a RS-485 output, establishing a bidirectional communication between the reader and the WS4 controllers, reducing the number of wires needed in the installation.
Managed by the host - It sends a signal to the alarm when the keypad is opened and/or dismantled by force.
The MTPADP-RS-EH with its slim housing is suitable for doorframe mounting.
The MTPADP-RS-EH is equipped with an orange backlight that can be easily disabled if necessary with My WS4.
The keypad changes its backlight color when the code or card is presented: from orange to red if the access is denied or from orange to green if the access is authorized. The orange LED indicates that the reader is connected (idle mode).
|Colours:||Black / Silver|
|Resin potted electronic:||Yes|
|Technology:||Keypad and RFID(EM & HID 125 kHz)|
|Reading type:||EM or HID cards|
|Read range:||up to 5 cm|
|Visible signals:||Managed by the host:
- Green LED: access granted
- Red LED: access denied
|Audible signal:||1 internal buzzer - managed by the host|
|Tamper protection:||Yes - managed by the host|
|Wiring:||50 cm cable|
|Voltage:||9-14 V DC|
|Consumption:||30 mA stand-by
100 mA maximum
|Dimensions (L x H x W):||51 x 92 x 27 mm|
|Operating Temperature:||-20ºC to 50ºC|
|Operating Humidity:||5% to 95% RH without condensation|
|MTPADPBK-RS-EH V2:||ABS - Black|
|MTPADPS-RS-EH V2:||ABS - Silver|
|* All product specifications are subject to change without notice.|