BIOPROX-MF is a dual Wiegand biometric reader combined with a Mifare 13.56 MHz proximity reader for access control applications with storage up to 9500 finger templates. Possibility to memorise finger template on Mifare card for unlimited number of users. Programmable Wiegand Output output (8 to 128 bits).
Double Technology: Biometry and MIFARE Proximity
The BIOPROX-MF offers double technology.
The reader reads Mifare Classic, Ultralight and Desfire cards with a read range of 6 cm.
SteelCoat protective coating provides added protection of fingerprint sensor for rugged environments. Recognition and matching time in less than 1 second.
The BIOPROX-MF authentications mode are Finger, Finger or card, Finger and Card, Finger on Card.
The storage capacity of the BIOPROX-MF is 9500 fingerprints and cards.
Finger on Card
In “Finger on Card” mode, there is NO LIMIT on the capacity of the fingerprints, since the fingerprints are stored in the user’s card, not in the biometric reader. Also the cards content only the 50% of the information required to granted the access. So in case of loss, the access security will not be put at risk. It will only be valid by presenting the corresponding footprint.
It's a perfect solution for installation with a large number of users as the information is not storage in the reader memory but in the card.
The finger on card mode is perfect for facilities in which personal information such as fingerprints are not allowed to be stored.
Reader configuration through Software
The configuration of the readers and fingerprint enrolment is done through PC Software. Connection between the biometric readers is RS485 and it is used for fingerprint transfer and configuration. Management of the reader is integrated in our access control software PROS CS.
Large LED around the reader for an easy and stylish reading status
Another key defining feature of the MINI range is the multi-colour rectangular status LED. The proximity and biometric reader’s change colour depending the user’s key fob/fingerprint is active (yellow), accepted (green) or denied (red).
Available in different colours
There are two colours available by default: silver and black.
There are more colours available upon request, like white, green, blue, red, charcoal… to ensure these units will complement any decor or building design.
|Colours:||Silver and black|
|Technology:||Biometry + Proximity|
|Protocol:||Wiegand output (8 to 128 bits)|
|Authentication:||Finger only, Finger or card, Finger and card, Finger on card|
|Matching time:||1:1000 identification: 1 s|
|Reading type:||Mifare Classic 1K & 4K, Ultralight, Desfire|
|Read range:||1.5 to 5.5 cm|
|Operating frequency:||13.56 MHz|
|Enrolment:||Fingerprint enrolment by desktop reader or reader itself|
|Configuration:||Configuration and template management done by software
Wiegand protocol adjustment done through PC
Fingerprints stored in the reader and backup copy kept in the software
|Visible signal:||Green LED: Access granted
Red LED: Access denied
Orange LED: Idle mode
|Voltage:||9-14 V DC|
|Consumption:||200 mA max.|
|Dimensions (L x H x W):||100 x 94 x 30 mm|
|Operating temperature:||-15 to +50ºC|
|Operating humidity:||5% to 93% RH, non-condensing|
|BIOPROXS-MF:||Metal - Silver|
|BIOPROXBK-MF:||ABS - Black|
|* All product specifications are subject to change without notice.|