We have developed our own RS485-TCP/IP module built-in a DIN-rail housing to allow quick and easy set-up of all our Wiegand biometric readers to connect to third party controllers. Ideal for retrofit if customers wish to change conventional proximity reader or keypad installation to biometric.
You can connect up to 20 biometric readers to one CNV1000 converter.
Quick and Easy set up of all our Wiegand biometric readers
The CNV1000 is a very good accessory to set up all our Wiegand biometric readers to connect to third party controller. Also its DIN rail enclosure will provide you a fast simple mounting and maintenance.
|Type of model:||TCP/IP to RS485 converter|
|Housing:||DIN rail, plastic, size 2 unit|
|Network interface:||10 BaseT, Half duplex|
|RS485 interface:||38400 Bps, 8 bit data, no parity, 1 stop bit|
|Configuration:||done by Internet browser, PROS or Biomanager
Configurable IP and MAC address, TCP port
Reset IP to default by tact switch
|Security:||Dedicated IP or/and MAC address|
|Visual signal:||Visual LED signalization (TCP/UDP packets)|
|PCB:||available on its own or with DIN housing|
|Power supply:||12 V DC, 100 mA|
|PCB size:||32 x 86 mm, 4 fixing holes dia. 3 mm|
|* All product specifications are subject to change without notice.|