2 Doors Network controller with door contacts, exit button inputs and free I/O:
The EWS-DR 2 door controller offers many options of access control. You can create up to 15,000 users and up to 30,000 events per controller. Connect 2 readers for 2 door application with 1 controller. Provided also with 2 door contacts, 2 Exit inputs, 2 free inputs and 2 free outputs for alarms and peripheral actions.
Distributed intelligence. RS-485 connection only. Unlimited controllers per system. System could be connected to EWS-DR and/or daisy chained on RS-485 (up to 32 controllers on one bus). Each controller has its own memory chip and completely standalone in case of communication failure.
Programmable (Bitwise) Wiegand Interface (26 to 128bits). Configurable free outputs, free inputs, exit inputs and door sensors. Possibility to connect proximity, keypads or biometric readers to readers inputs.
Anti-passback, Mantrap, Scenarios, Muster reports.
EWS in Lift Mode
The EWS-DR Controller can be put in Lift Mode for controlling the floor access and permitting the use of elevator only by authorized cardholder. One I/O Board RB0408 enables control of 8 floors. Max. of 4 RB0408 boards can be used per EWS-DR controller (32 floors). Through the Access levels, the cardholder can be allowed to access certain floors even in certain time zones.
Easy configuration by PROS CS
EWS-DR provides all the information requested by the readers. Creation of users via the PROS CS is user-friendly allowing to associate each user to different reader technologies: keypad, proximity and/or biometric readers (integrated finger templates enrolment). Software and firmware updates available for latest versions.
|Max number of controllers per installation:||Unlimited|
|Max number of doors per system:||Unlimited|
|Number of Wiegand Readers (8 to 128 bits):||2 (1 with APB)|
|Number of Users:||15000 Max|
|Number of Events:||30000 Max|
|Number of Time Zones:||24|
|Number of Users Groups:||Unlimited|
|Number of Bank Holidays:||32|
|Internal Memory:||Yes, with time and date back-up by Lithium CR2032 battery|
|Door relays:||2 (2 x 10A)|
|Programmable Relays:||2 (2 x 10A)|
|Programmable Inputs:||2 (Opto paired)|
|Exit Button Input:||2 (1 per door)|
|Door Contacts:||2 (1 per door)|
|Controller Updates:||RS-485 bus|
|Biometric Readers:||Biometric readers use the controllers communication buses (RS-485)|
|Lift mode:||Yes, with RB0408|
|Addressing:||Every single controller has a unique address (serial number)|
|Power Supply:||12 VDC|
|Programming and System Management:||Free Windows Software PROS CS|
|Dimensions PCB DIN rail (mm):||157x87|
|Dimensions DIN rail (mm):||161x91x62|
|* All product specifications are subject to change without notice.|